top of page

Kelly McAlinden Group

Public·15 members
Nikita Vlasov
Nikita Vlasov

Neffos TP704A Flash File Frp Hang On Logo Fix | Firmware |: A Complete Guide



Neffos TP704A Flash File Frp Hang On Logo Fix Firmware




If you are looking for a solution to fix your Neffos TP704A flash file frp hang on logo problem, you have come to the right place. In this article, we will show you how to download and install the latest firmware for your Neffos TP704A device and get rid of the annoying frp lock.




Neffos TP704A Flash File Frp Hang On Logo Fix | Firmware |



What is Neffos TP704A Flash File Frp Hang On Logo Problem?




Neffos TP704A is a smartphone model from TP-Link, a well-known manufacturer of networking products. It runs on Android 7.0 Nougat operating system and has a 5.5-inch HD display, a quad-core processor, 2GB of RAM, 16GB of internal storage, a 13MP rear camera, and a 5MP front camera.


However, some users have reported that their Neffos TP704A devices have encountered a flash file frp hang on logo problem. This means that their devices are stuck on the boot screen with the Neffos logo and cannot proceed to the home screen. This is caused by a factory reset protection (frp) lock that prevents unauthorized access to the device after a factory reset.


How to Download and Install Neffos TP704A Flash File Frp Hang On Logo Fix Firmware ?




The good news is that you can easily fix this problem by downloading and installing the latest firmware for your Neffos TP704A device. The firmware is a software program that controls the hardware and functions of your device. By updating the firmware, you can improve the performance and stability of your device and fix any bugs or issues.


To download and install the latest firmware for your Neffos TP704A device, you need to follow these steps:


  • Download the firmware file from the official TP-Link website. You can find it here: https://www.tp-link.com/en/support/download/neffos-tp704a/#Firmware . Make sure you download the correct version for your device model and region.



  • Extract the firmware file to your computer using a zip extractor program. You will get a folder with several files inside.



  • Connect your Neffos TP704A device to your computer using a USB cable. Make sure your device is powered off.



  • Press and hold the Volume Up and Power buttons together until you see the Fastboot mode screen on your device.



  • On your computer, open the folder where you extracted the firmware file. Double-click on the flash_all.bat file to start the flashing process.



  • Wait for the flashing process to complete. Do not disconnect or interrupt the process.



  • Once the flashing process is done, your device will reboot automatically. You can disconnect your device from your computer.



  • Your device should now boot normally without any frp lock or hang on logo problem.



Conclusion




In this article, we have shown you how to download and install Neffos TP704A flash file frp hang on logo fix firmware for your device. This is an easy and effective way to solve this common problem and enjoy your device again. We hope this article was helpful for you. If you have any questions or feedback, please leave them in the comments below. 4e3182286b


About

Welcome to the group! You can connect with other members, ge...
bottom of page